DTH Hammer ea Seri ya Mission le Phetoho ea Mofuta o Kgolo ke mosebetsi o mocha o mocha o nang le litšebiso tsa boholo le o amanang le litšebiso tsa lehae tse amanang le ho fihla ho tšoana, o hlahisitsoeng ho sebelisoa ho tšoana e kgolo le ho tšoana e telele. O sebelisoa ka bophara ho tšebetso ea mafura, ho fihla ho litshebe tsa mafura, ho tšebetso ea ho qhobela lithšo, le ho etsa litšebiso tsa ho qala ho tšebetso ea ho qala.
Seri ena se hlahisitsoe ho latelana le tshebeletso ea Mission/DHD/NUMA/N/YC e amanang le lehae, e leng tshebeletso e amanang le litšebiso tsa lehae tse ngata. E sebelisoa ka bophara ho baathathali ba batlang mesebetsi ea ho tšoana e nang le masepala a maholo a ho tšoana le ho tšoana e sa tloaelehang le ho tšoana e sa tloaelehang.
E entsoe ka tšepe e entsoeng ka tšepe e nang le matla a phahameng le e sebetsanang le mocheso o nepahetseng, Mission Series e fana ka matla a matla a ho thulana, ho hanyetsa ho roala hantle le ts'ebetso e tsitsitseng maemong a phahameng a moea. Tsamaiso e ntlafalitsoeng ea moea o kenang ka hare e etsa hore ho be le phetisetso e sebetsang ea matla, ho fokotseha ha tšebeliso ea moea le ho ntlafatsa lebelo la ho kenella ka har'a majoe a thata.
Mission Series e akaretsa mefuta e mengata e boima e etselitsoeng bophara bo mahareng ho isa ho bo boholo ba likoti, e tšehetsang tikoloho e batlang ho cheka joalo ka likoti tse tebileng tsa meepo le ts'ebetso e kholo ea ho phatloha ha majoe. E lumellana ka botlalo le li-bits tsa Mission / DHD / NUMA tse tloaelehileng le li-blade tsa API tse boima, tse lumellang ho kenngoa habonolo le li-rig tsa khatello e phahameng ea DTH.
Ka ho lebala ho tsebo ya litholo le ho fanoa ha lefelo la ho qetela, Seri ya Mission e ka fihla ho tshehetsa ho qetela ho sebetsa ka mokhoa o rumisang ho bophahamo o fetang 300–600 m, e leng karolo e ratoang ke baahelisi ba ho qetela ba sechaba le mefuta e mengata ya ho qetela.
Ho qala ho sebedisa: o tumele mohato → o fumana phatlalatso ya teknoloji e fapaneng le ho bontša tharollo → o amohela toropo → ho etsa le ho tšekwa → ho romela ha kotsi → mohato o tloha ho sebelisa likarolo tse ngata le tšebetso ya teknoloji. Re araba haufi le re thusa ka mohato ohle wa toropo.
Ha u sule o tseba serisi sefe sa DTH hammer se fita ho ts'ebetso ea hao? Ratisa re rona diametere e hlokahalang ya pholo le bophahle, masenine a rona a tla lona serisi sa hammer le modeli e tšoanang hantle le rig le formation ea hao.
Liste ya M30 |
|||
| Moahloli. | Mafuta | Fetola | Nomoro ya Mafuta |
| 1 | Mafuta a Maholo | 4.5 Kg | 01-Mis30-01 |
| 2 | "O" Ring | 0.01 Kg | 01-Mis30-02 |
| 3 | Vali ya boloka | 0.13 Kg | 01-Mis30-03 |
| 4 | Letšatši la Phalane | 0.02 Kg | 01-Mis30-04 |
| 5 | Sedima sa Mokhetho | 0.76 Kg | 01-Mis30-05 |
| 6 | Silindara ea Bophelong | 1.45 Kg | 01-Mis30-06 |
| 7 | Piston | 4.8 Kg | 01-Mis30-07 |
| 8 | Mokhetho oa Piston | 7.6 Kg | 01-Mis30-08 |
| 9 | Sleeve ea Tlhomamisang | 0.9 Kg | 01-Mis30-09 |
| 10 | Ring ya Kgoniho | 0.2 Kg | 01-Mis30-10 |
| 11 | "O" Ring | 0.01 Kg | 01-Mis30-11 |
| 12 | Tšepa ya ho bula | 2.5 Kg | 01-Mis30-12 |
| 13 | Bit ya Ho Tšepisa | — | 01-Mis30-13 |
Mabapi a Bokone |
|||
| Dilo | Parametere | ||
| Boleleli (Ha ho Bit) | 931 mm | ||
| Fetola | 23 Kg | ||
| Boholo ba ntlha | φ82 mm | ||
| Mokhutlo wa ho hokahanya | API 2 3/8" REG | ||
| Sekhutlo sa lebiti | M30 | ||
| Mofuta wa lihole | φ90–Φ115 mm | ||
| Phetshe ya mosebetsi | 1.0–1.7 MPa | ||
| Lebelo le khothalletsoang la ho potoloha | 30–50 r/min | ||
| Ho sebelisa hawa (1.0 MPa) | 4 m³/min | ||
| Ho sebelisa lefifi (1.5 MPa) | 6.5 m³/min |
Lipalo tsa M40 |
|||
| Moahloli. | Mafuta | Fetola | Nomoro ya Mafuta |
| 1 | Mafuta a Maholo | 8.1 Kg | 01-Mis40-01 |
| 2 | "O" Ring | 0.01 Kg | 01-Mis40-02 |
| 3 | Vali ya boloka | 0.3 kg | 01-Mis40-03 |
| 4 | Letšatši la Phalane | 0.04 Kg | 01-Mis40-04 |
| 5 | Sedima sa Mokhetho | 1.5 kg | 01-Mis40-05 |
| 6 | Silindara ea Bophelong | 2.1 Kg | 01-Mis40-06 |
| 7 | Piston | 8.4 Kg | 01-Mis40-07 |
| 8 | Mokhetho oa Piston | 15 kg | 01-Mis40-08 |
| 9 | Sleeve ea Tlhomamisang | 1.84 Kg | 01-Mis40-09 |
| 10 | Ring ya Kgoniho | 0.3 kg | 01-Mis40-10 |
| 11 | "O" Ring | 0.01 Kg | 01-Mis40-11 |
| 12 | Tšepa ya ho bula | 3.9 Kg | 01-Mis40-12 |
| 13 | Bit ya Ho Tšepisa | — | 01-Mis40-13 |
Mabapi a Bokone |
|||
| Dilo | Parametere | ||
| Boleleli (Ha ho Bit) | 1004 mm | ||
| Fetola | 40.5 Kg | ||
| Boholo ba ntlha | φ99 mm | ||
| Mokhutlo wa ho hokahanya | API 2 3/8" REG | ||
| Sekhutlo sa lebiti | M40 | ||
| Mofuta wa lihole | 110–135 mm | ||
| Phetshe ya mosebetsi | 1.0–2.2 MPa | ||
| Lebelo le khothalletsoang la ho potoloha | 30–60 r/min | ||
| Tšebeletso ya ntlha | 5 m³/min | ||
| Tšebeletso ya ntlha | 9 m³/min |
Lipontsho la Maphutho a M50 |
|||
| Moahloli. | Mafuta | Fetola | Nomoro ya Mafuta |
| 1 | Mafuta a Maholo | 13.7 Kg | 01-Mis50-01 |
| 2 | "O" Ring | 0.02 Kg | 01-Mis50-02 |
| 3 | Vali ya boloka | 0.7 Kg | 01-Mis50-03 |
| 4 | Letšatši la Phalane | 0.1 Kg | 01-Mis50-04 |
| 5 | Sedima sa Mokhetho | 2 Kg | 01-Mis50-05 |
| 6 | Silindara ea Bophelong | 2.8 Kg | 01-Mis50-06 |
| 7 | Piston | 15 kg | 01-Mis50-07 |
| 8 | Mokhetho oa Piston | 24 Kg | 01-Mis50-08 |
| 9 | Sleeve ea Tlhomamisang | 2.6 Kg | 01-Mis50-09 |
| 10 | Ring ya Kgoniho | 0.7 Kg | 01-Mis50-10 |
| 11 | "O" Ring | 0.01 Kg | 01-Mis50-11 |
| 12 | Tšepa ya ho bula | 7.1 Kg | 01-Mis50-12 |
| 13 | Bit ya Ho Tšepisa | — | 01-Mis50-13 |
Mabapi a Bokone |
|||
| Dilo | Parametere | ||
| Boleleli (Ha ho Bit) | 1122 mm | ||
| palesa ea ho feta | 70.5 Kg | ||
| Boholo ba ntlha | 126 mm | ||
| Mokhutlo wa ho hokahanya | API 2 3/8" REG | ||
| Sekhutlo sa lebiti | M50 | ||
| Mofuta wa lihole | 136–155 mm | ||
| Phetshe ya mosebetsi | 1.0–2.5 MPa | ||
| Lebelo le khothalletsoang la ho potoloha | 30–60 r/min | ||
| Ho sebelisa hawa (1.0 MPa) | 7 m³/min | ||
| Khothliso ya Lefu (1.8 MPa) | 13 m³/min |
Lipalo tsa M60 |
|||
| Moahloli. | Mafuta | Fetola | Nomoro ya Mafuta |
| 1 | Mafuta a Maholo | 20 Kg | 01-Mis60-01 |
| 2 | "O" Ring | 0.01 Kg | 01-Mis60-02 |
| 3 | Vali ya boloka | 0.56 Kg | 01-Mis60-03 |
| 4 | Letšatši la Phalane | 0.06 Kg | 01-Mis60-04 |
| 5 | Sedima sa Mokhetho | 3.5 Kg | 01-Mis60-05 |
| 6 | Silindara ea Bophelong | 3.9 Kg | 01-Mis60-06 |
| 7 | Piston | 21.5 Kg | 01-Mis60-07 |
| 8 | Mokhetho oa Piston | 30.5 Kg | 01-Mis60-08 |
| 9 | Sleeve ea Tlhomamisang | 4.8 Kg | 01-Mis60-09 |
| 10 | "O" Ring | 0.01 Kg | 01-Mis60-10 |
| 11 | Ring ya Kgoniho | 0.9 Kg | 01-Mis60-11 |
| 12 | "O" Ring | 0.01 Kg | 01-Mis60-12 |
| 13 | Tšepa ya ho bula | 5.8 Kg | 01-Mis60-13 |
| 14 | Bit ya Ho Tšepisa | — | 01-Mis60-14 |
Mabapi a Bokone |
|||
| Dilo | Parametere | ||
| Boleleli (Ha ho Bit) | 1129 mm | ||
| Fetola | 91.5 Kg | ||
| Boholo ba ntlha | 144 mm | ||
| Mokhutlo wa ho hokahanya | API 3 1/2" REG | ||
| Sekhutlo sa lebiti | M60 | ||
| Mofuta wa lihole | 152–203 mm | ||
| Phetshe ya mosebetsi | 1.0–2.8 MPa | ||
| Lebelo le khothalletsoang la ho potoloha | 30–60 r/min | ||
| Ho sebelisa hawa (1.0 MPa) | 18 m³/min | ||
| Khothliso ya Lefu (1.8 MPa) | 25 m³/min |
Liste ya Mafuta a M80 |
|||
| Moahloli. | Mafuta | Fetola | Nomoro ya Mafuta |
| 1 | Mafuta a Maholo | 43 Kg | 01-Mis80-01 |
| 2 | "O" Ring | 0.01 Kg | 01-Mis80-02 |
| 3 | Vali ya boloka | 0.46 kg | 01-Mis80-03 |
| 4 | Letšatši la Phalane | 0.07 Kg | 01-Mis80-04 |
| 5 | Sedima sa Valve | 0.65 kg | 01-Mis80-05 |
| 6 | "O" Ring | 0.01 Kg | 01-Mis80-06 |
| 7 | Pini ya ho Tlala | 0.3 kg | 01-Mis80-07 |
| 8 | "O" Ring | 0.01 Kg | 01-Mis80-08 |
| 9 | Valve e Eketsehileng | 2 Kg | 01-Mis80-09 |
| 10 | Plug ya Nylon | 0.04 Kg | 01-Mis80-10 |
| 11 | Piston | 42 Kg | 01-Mis80-11 |
| 12 | Mokhetho oa Piston | 43 Kg | 01-Mis80-12 |
| 13 | Sleeve ea Tlhomamisang | 9.8 Kg | 01-Mis80-13 |
| 14 | Hlahloba Ring | 0.09 kg | 01-Mis80-14 |
| 15 | Ring ya Kgoniho | 1.9 Kg | 01-Mis80-15 |
| 16 | "O" Ring | 0.01 Kg | 01-Mis80-16 |
| 17 | Tšepa ya ho bula | 17 Kg | 01-Mis80-17 |
| 18 | Bit ya Ho Tšepisa | — | 01-Mis80-18 |
Mabapi a Bokone |
|||
| Dilo | Parametere | ||
| Boleleli (Ha ho Bit) | 1333 mm | ||
| Fetola | 160.5 Kg | ||
| Boholo ba ntlha | 180 mm | ||
| Mokhutlo wa ho hokahanya | API 4 1/2" REG | ||
| Sekhutlo sa lebiti | M80 | ||
| Mofuta wa lihole | 195–245 mm | ||
| Phetshe ya mosebetsi | 1.5–3.3 MPa | ||
| Lebelo le khothalletsoang la ho potoloha | 30–60 r/min | ||
| Khothliso ya Lefu (1.8 MPa) | 26 m³/min | ||
| Khothliso ya Lefu (2.4 MPa) | 35 m³/min |
1. Ho qhobela ho tshebetso ea metsi
E sebelisoa bakeng sa liliba tsa metsi a bolulo, a temo, a indasteri le a masepala. E fana ka ts'ebetso e sebetsang ea ho cheka ka har'a likoti tse tebileng le majoe a thata.
2. Ho batla ho lithaba tsa ho qhobela
E tshehetsang ho fumana mafura le ho qhaqha lihole tsa ho qhaqha. E fa le lebelo la ho qhaqha le ho sebetsa ka tsela e tsitsiho ka mafura a maholo.
3. Ho qhobela ho lithaba tsa ho qhobela
E sebelisoa ho qhaqha lithambo tsa granite, limestone, le mafura a mang a maholo ho qhaqha lihole tsa ho qhaqha. E netefatsa ho qhaqha ka tsela e tsitsiho le e etsahalang ka tsela e phahameng.
4. Ho etsa le ho theha mafoko a ho qetela
E sebelisoe ho mefuta ya diprojekte ya boemo ba lefase, joalo ka ho atisa leqorobane, ho qhaqha lihole tsa ho atisa, le diprosesing tsa ho atisa lefase ka mafatso a sa tsejoeng.
5. Ho qhaqha ho lefase la ho lekola mafura a mahlakore
E tshehetsang ho qhaqha ho lefase la ho lekola mafura a mahlakore a lokolohileng ho qhaqha lihole tse kholo le tse tsitsiho ka tsela e phahameng.
Mofuta o mocha wa ho qetela ho tšoara ho fihla ho bophelo ba boholo
E amanang le mafatso a lefapha la Mission / DHD / NUMA
Mofuta o mocha wa ho qetela ho fihla ho bophelo ba boholo
Mokhoa o ntlafalitsoeng oa ho phalla ha moea o fokotsa tšenyo ea matla
Ho hanyetsa ho roala ka matla ka'mele oa tšepe e kopantsoeng e sebetsitsoeng ka mocheso
Ts'ebetso e tsitsitseng maemong a phahameng a khatello ea mosebetsi
E loketse ho sebetsa ka sekoting se tebileng le ho sebetsa ka majoe a majoe a majoe a majoe a majoe a majoe
Bophelo bo bolelele ba ts'ebeletso bo nang le nako e fokolang ea ho emisa ts'ebetso
Ho nkeloa sebaka habonolo ke likarolo tse tloaelehileng tsa machaba
Q1: DTH Hammer ea Mission Series e sebelisetsoa eng?
Mission Series e etselitsoe ho sebetsa merafong e meholo, ho cheka liliba tsa metsi a tebileng, ho phatloha ha majoe le merero e boima ea motheo oa mehaho. E loketse ho cheka ka matla a maholo libakeng tse nang le majoe a thata.
P2: Na Mission Series e lumellana le lihlahisoa tse ling tsa machaba?
E, Mission Series e etselitsoe hore e be tsamaiso e nkelang sebaka e lumellanang le Mission, DHD, NUMA, N, le YC, e leng se etsang hore e fapanyetsane le lihlahisoa tse ngata tsa machaba.
P3: Na u ka fana ka tshebetso ea OEM kapa tshebetso ea lebitso la rona?
Ee, re fana ka tshebetsong eohle ya OEM/ODM e fana ka tsebo ya lebitso la lefela, ho bala lebitso la mofuta, khetho ya mabotu, ho bala pakeng ya mafatsheng, le ho bala lebitso la mofuta ho latela litšilaelo tsa mosali.
Q4: Nako ea ho fihla ha mafutha a Seri ea Mission ke efe?
Mafutha a sebetsang ka kakaretso a fihla ka lile 10–20. Mafutha a amanang le litšilaelo a hloka lile 25–35 ho latela boholo ba tšebetso le litšilaelo.
P5: Mohlala o tsamaya joang ka naha e ngoe?
Re romela hantle ka leqhubu la leqhubu la mafutha le leqhubu la LCL. Bona bonke bafutha ba pakisitsoe ka dipakeng tsa dere tsa ho romela kapa liframe tsa steele ho netefatsa ho romela ka sebaka se seholo.
Hlalosetso © Quzhou Mazellion Heavy Industry Technology Co., Ltd. Tsohle tsa Lichaba li Sebetsa — Lefelo la bopeli
EN
