U I-DTH Hammer sika-SD isakhelwe ukwenza izinye zokuphakamisa ezinkulu kwezinye zokuphakamisa emaphakathini aphakeme kunezinye zokuphakamisa ephakeme. Yakhelwe ukusebenza kwezinye zokuphakamisa ezinkulu, futhi yasebenzisa kakhulu ekuphakamiseni kwamanzi, ekuphakamiseni kwezilwane, ekuphakamiseni kwezindlu zokuphakamisa, ekuphakamiseni kwezinye zokuphakamisa zokuphakamisa amanzi, nokuphakamisa kwezinye zokuphakamisa zokubeka izinsiza zokuphakamisa, lapho kufuneka ukuphakama okuphelele nokusebenza okuphelele.
Ikhiqizwa ngensimbi ehlanganisiwe ephezulu ephathwa ngokushisa enezingxenye zangaphakathi ezicutshungulwa ngokunemba, i-SD Series inikeza amandla omthelela anamandla futhi azinzile ngenkathi igcina ukumelana nokuqina okuhle kakhulu ngaphansi kwezimo zomoya ezinengcindezi ephezulu. Uhlelo lokusabalalisa umoya olwenziwe kahle lunciphisa ukulahlekelwa amandla, lwenza ngcono ijubane lokumba, futhi lunciphisa ukusetshenziswa komoya, kusiza abakhiqizi ukuba bathole umkhiqizo ophakeme nezindleko zokusebenza eziphansi.
I-SD Series ihlanganisa amamodeli amaningi asukela I-SD4 kuya ku-SD12 , ukumboza amadayimitha omgodi kusuka izinduku eziphansi . Ubukhulu obuhlukahlukene besando buyatholakala ukuze bufanelane nama-rig ahlukahlukene okubhora, izinduku zokubohla, nama-bits shanks, okwenza uchungechunge lufanelekile kokubili ukubhora okujwayelekile kwamanzi kanye nokusetshenziswa kokubhola kwesisekelo esinobubanzi obukhulu. Izinduku ziyavumelana nokuxhumeka kwe-API okujwayelekile kanye nezinhlelo zokusebenza ze-DTH ezisetshenziswa kabanzi.
Nge ingcindezi yokusebenza esukela ku i-MPa engu-1.0 kuya ku-3.3 , i-Seri ye-SD ibeka ubukhulu be-driiling okufanayo kwezinkundla zemifula emihle, emangalisayo, nezinkundla zemifula ephakade. Isithunzi sakho esikhulu, ukwenza izinkumbulo ngokomlando, nokubonakala kwezinkumbulo ezinokugcina kusenzo kuyenza ukuthi iseri yokuqala iyasebenza ngendlela elide futhi ibe yinkimbuzo encane ekhaya.
Kungaba noma yikuphi ukuthi kusebenzisa amashele wezilwanyana, ukudrila kwezinkundla zokushisa, iziprojekthi zomkhulu wokushisa, noma ukwakha kwezinkundla, i-Seri ye-SD ibeka ubukhulu be-driiling obuhle, ukusebenza okuphakathi, nokusebenza okuphakathi kwezindlela zokudrila zomkhulu kwenhlanganiswe yezizwe.
Ukuvula ukuxhasana: ushike izindaba zakho → uthola isilungelo sesayensi esihambisana nesilinganiso & isibonelo sokubhala isibhali → uthi kakhulu ukuthi uyavumela ishishini → ukuproduka & ukuzwela → ukuthumela kahle → ukusiza ngamaphetha okusebenza kanye nokusiza kwesayensi ngokuphakeme. Sibonisa kahle futhi sikhuluma nako konke isikhathi sokuphatha ishishini.
Akukhona ukuthi uyazi iphi i-Seri ye-DTH hammer eyodwa kulemsebenzi yakho? Sibiza sizobika ubude nobude be-hole obudingekayo, abasebenzi bethu baza kubonakalisa i-Seri ye-hammer enenhloko futhi imodeli enenhloko yokubonakalisa kwe-rig yakho nokufakwa kwakho.
Umlawuli wezinkumbulo ze-SD4 |
|||
| Isiphindeko. | Amaphartri | Isisindo | Inombolo Yophasi |
| 1 | Isigaba esisisekelwe phezulu | 8.8 Kg | 01-SD4-01 |
| 2 | "O" Ring | 0.01 Kg | 01-SD4-02 |
| 3 | Ivalve yokubona | 0.46 Kg | 01-SD4-03 |
| 4 | Unyaka | 0.04 Kg | 01-SD4-04 |
| 5 | Ibafu le-rubber | 0.2 Kg | 01-SD4-05 |
| 6 | Isitsha Sesivali | 2.1 Kg | 01-SD4-06 |
| 7 | Icylinder engaphakathi | 2.45 Kg | 01-SD4-07 |
| 8 | Ipiston | 9 Kg | 01-SD4-08 |
| 9 | Ibokisi yepiston | 15.6 Kg | 01-SD4-09 |
| 10 | Iringi Lokugcina | 0.2 Kg | 01-SD4-10 |
| 11 | "O" Ring | 0.01 Kg | 01-SD4-11 |
| 12 | Ukubhala Kwesikhumba | 4 Kg | 01-SD4-12 |
| 13 | Isikhumba Sokudlula | — | 01-SD4-13 |
Amapharamitha obuchwepheshe |
|||
| Into | Ipharamitha | ||
| Ubude (Ngaphandle Kwesikhumba) | 1082 mm | ||
| Isisindo | 43 Kg | ||
| Ububanzi Bokuxhasa | 99 mm | ||
| Ukugxilwa Kwesithunzi | API 2 3/8" REG | ||
| Isikhathi Sesibhakabhaka | SD4 | ||
| Isiphakathi sesikhala | 110–135 mm | ||
| Umphawu Wokusebenza | 1.0–2.2 MPa | ||
| Isikhathi Sokubhala Okumelwe | 30–60 izikhathi ngeminithi | ||
| Ukusebenzisa amafutha (1.8 MPa) | 5.5 m³/min | ||
| Ukusetshenziswa kwe-Air (2.4 MPa) | 10 m³/min |
Uluhlu lwezinto zika-SD5 |
|||
| Isiphindeko. | Amaphartri | Isisindo | Inombolo Yophasi |
| 1 | Isigaba esisisekelwe phezulu | 14.7 Kg | 01-SD5-01 |
| 2 | "O" Ring | 0.02 Kg | 01-SD5-02 |
| 3 | Ivalve yokubona | 1 Kg | 01-SD5-03 |
| 4 | Unyaka | 0.06 Kg | 01-SD5-04 |
| 5 | Ibafu le-rubber | 0.2 Kg | 01-SD5-05 |
| 6 | Isitsha Sesivali | 4.1 Kg | 01-SD5-06 |
| 7 | Icylinder engaphakathi | 4.4 Kg | 01-SD5-07 |
| 8 | Ipiston | 17.3 Kg | 01-SD5-08 |
| 9 | Ibokisi yepiston | 23.5 Kg | 01-SD5-09 |
| 10 | Iringi Lokugcina | 0.5 Kg | 01-SD5-10 |
| 11 | "O" Ring | 0.01 Kg | 01-SD5-11 |
| 12 | Ukubhala Kwesikhumba | 7.8 Kg | 01-SD5-12 |
| 13 | Isikhumba Sokudlula | — | 01-SD5-13 |
Amapharamitha obuchwepheshe |
|||
| Into | Ipharamitha | ||
| Ubude (Ngaphandle Kwesikhumba) | 1178 mm | ||
| Isisindo | 73.6 Kg | ||
| Ububanzi Bokuxhasa | 125 mm | ||
| Ukugxilwa Kwesithunzi | API 2 3/8" REG | ||
| Isikhathi Sesibhakabhaka | SD5 | ||
| Isiphakathi sesikhala | 135–155 mm | ||
| Umphawu Wokusebenza | 1.0–2.5 MPa | ||
| Isikhathi Sokubhala Okumelwe | 30–60 izikhathi ngeminithi | ||
| Ukusebenzisa amafutha (1.8 MPa) | 9 m³/min | ||
| Ukusetshenziswa kwe-Air (2.4 MPa) | 15 m³/min |
Umlinganiso wezinto ze-SD6 |
|||
| Isiphindeko. | Amaphartri | Isisindo | Inombolo Yophasi |
| 1 | Isigaba esisisekelwe phezulu | 20.3 Kg | 01-SD6-01 |
| 2 | "O" Ring | 0.02 Kg | 01-SD6-02 |
| 3 | Ivalve yokubona | 0.8 Kg | 01-SD6-03 |
| 4 | Unyaka | 0.05 Kg | 01-SD6-04 |
| 5 | Ibafu le-rubber | 0.3 Kg | 01-SD6-05 |
| 6 | Isitsha Sesivali | 5 kg | 01-SD6-06 |
| 7 | Icylinder engaphakathi | 4 Kg | 01-SD6-07 |
| 8 | Ipiston | 23.5 Kg | 01-SD6-08 |
| 9 | Ibokisi yepiston | 34.5 Kg | 01-SD6-09 |
| 10 | Iringi Lokugcina | 0.5 Kg | 01-SD6-10 |
| 11 | "O" Ring | 0.01 Kg | 01-SD6-11 |
| 12 | Isilayiv yesihlalo | 1.6 Kg | 01-SD6-12 |
| 13 | Ukubhala Kwesikhumba | 8 Kg | 01-SD6-13 |
| 14 | Isikhumba Sokudlula | — | 01-SD6-14 |
Amapharamitha obuchwepheshe |
|||
| Into | Ipharamitha | ||
| Ubude (Ngaphandle Kwesikhumba) | 1277 mm | ||
| Isisindo | 99 Kg | ||
| Ububanzi Bokuxhasa | φ142 mm | ||
| Ukugxilwa Kwesithunzi | API 3 1/2" REG | ||
| Isikhathi Sesibhakabhaka | SD6 | ||
| Isiphakathi sesikhala | 150–190 mm | ||
| Umphawu Wokusebenza | 1.0–2.5 MPa | ||
| Isikhathi Sokubhala Okumelwe | 30–60 izikhathi ngeminithi | ||
| Ukusebenzisa amafutha (1.8 MPa) | 20 m³/min | ||
| Ukusetshenziswa kwe-Air (2.4 MPa) | 28 m³/min |
Umlingano wezinto zika-SD8 |
|||
| Isiphindeko. | Amaphartri | Isisindo | Inombolo Yophasi |
| 1 | Isigaba esisisekelwe phezulu | 42 Kg | 01-SD8-01 |
| 2 | Isikhombisa Sokuhlelwa | 0.2 Kg | 01-SD8-02 |
| 3 | "O" Ring | 0.02 Kg | 01-SD8-03 |
| 4 | Ivalve yokubona | 1.3 Kg | 01-SD8-04 |
| 5 | Unyaka | 0.09 Kg | 01-SD8-05 |
| 6 | Ibafu le-rubber | 0.4 Kg | 01-SD8-06 |
| 7 | Isitsha Sesivali | 12.7 Kg | 01-SD8-07 |
| 8 | Icylinder engaphakathi | 9.1 Kg | 01-SD8-08 |
| 9 | Ipiston | 43.5 Kg | 01-SD8-09 |
| 10 | Ibokisi yepiston | 64.5 Kg | 01-SD8-10 |
| 11 | Iringi Lokugcina | 1.25 Kg | 01-SD8-11 |
| 12 | "O" Ring | 0.02 Kg | 01-SD8-12 |
| 13 | Isilayiv yesihlalo | 3.35 Kg | 01-SD8-13 |
| 14 | Ukubhala Kwesikhumba | 16 kg | 01-SD8-14 |
| 15 | Isikhumba Sokudlula | — | 01-SD8-15 |
Amapharamitha obuchwepheshe |
|||
| Into | Ipharamitha | ||
| Ubude (Ngaphandle Kwesikhumba) | 1463 mm | ||
| Isisindo | 194 Kg | ||
| Ububanzi Bokuxhasa | 180 mm | ||
| Ukugxilwa Kwesithunzi | API 4 1/2" REG | ||
| Isikhathi Sesibhakabhaka | SD8 | ||
| Isiphakathi sesikhala | 195–254 mm | ||
| Umphawu Wokusebenza | 1.5–3.3 MPa | ||
| Isikhathi Sokubhala Okumelwe | 30–60 izikhathi ngeminithi | ||
| Ukusebenzisa amafutha (1.8 MPa) | 26 m³/min | ||
| Ukusetshenziswa kwe-Air (2.4 MPa) | 34 m³/min |
Umlawuli wezinto zokusebenza ze-SD10 |
|||
| Isiphindeko. | Amaphartri | Isisindo | Inombolo Yophasi |
| 1 | Isigaba esisisekelwe phezulu | 60 Kg | 01-SD10-01 |
| 2 | "O" Ring | 0.03 Kg | 01-SD10-02 |
| 3 | Ivalve yokubona | 1.5 Kg | 01-SD10-03 |
| 4 | Unyaka | 0.2 Kg | 01-SD10-04 |
| 5 | Isitsha Sesivali | 12.8 Kg | 01-SD10-05 |
| 6 | Icylinder engaphakathi | 13.5 Kg | 01-SD10-06 |
| 7 | Ipiston | 71 Kg | 01-SD10-07 |
| 8 | Ibokisi yepiston | 85 Kg | 01-SD10-08 |
| 9 | Iringi Lokugcina | 2.76 Kg | 01-SD10-09 |
| 10 | "O" Ring | 0.02 Kg | 01-SD10-10 |
| 11 | Isilayiv yesihlalo | 5 kg | 01-SD10-11 |
| 12 | Ukubhala Kwesikhumba | 21 Kg | 01-SD10-12 |
| 13 | Isikhumba Sokudlula | — | 01-SD10-13 |
Amapharamitha obuchwepheshe |
|||
| Into | Ipharamitha | ||
| Ubude (Ngaphandle Kwesikhumba) | 1413 mm | ||
| Isisindo | 273 Kg | ||
| Ububanzi Bokuxhasa | 225 mm | ||
| Ukugxilwa Kwesithunzi | API 5 1/2" REG | ||
| Isikhathi Sesibhakabhaka | SD10 | ||
| Isiphakathi sesikhala | 254–311 mm | ||
| Umphawu Wokusebenza | 1.5–3.3 MPa | ||
| Isikhathi Sokubhala Okumelwe | 25–50 r/min | ||
| Ukusebenzisa amafutha (1.8 MPa) | 40 m³/min | ||
| Ukusetshenziswa kwe-Air (2.4 MPa) | 60 m³/min |
Uluhlu lwezinto zokusebenza se-SD12 |
|||
| Isiphindeko. | Amaphartri | Isisindo | Inombolo Yophasi |
| 1 | Isigaba esisisekelwe phezulu | 134 Kg | 01-SD12-01 |
| 2 | Isikhombisa Sokuhlelwa | 0.8 Kg | 01-SD12-02 |
| 3 | "O" Ring | 0.04 Kg | 01-SD12-03 |
| 4 | Ivalve yokubona | 1.5 Kg | 01-SD12-04 |
| 5 | Unyaka | 0.2 Kg | 01-SD12-05 |
| 6 | Isitsha Sesivali | 21 Kg | 01-SD12-06 |
| 7 | Icylinder engaphakathi | 29 Kg | 01-SD12-07 |
| 8 | Ipiston | 118 Kg | 01-SD12-08 |
| 9 | Ibokisi yepiston | 220 kg | 01-SD12-09 |
| 10 | Iringi Lokugcina | 5.2 Kg | 01-SD12-10 |
| 11 | "O" Ring | 0.03 Kg | 01-SD12-11 |
| 12 | Isilayiv yesihlalo | 5.2 Kg | 01-SD12-12 |
| 13 | Isikhombisa Sokuhlelwa | 0.8 Kg | 01-SD12-13 |
| 14 | Ukubhala Kwesikhumba | 53.5 Kg | 01-SD12-14 |
| 15 | Isikhumba Sokudlula | — | 01-SD12-15 |
Amapharamitha obuchwepheshe |
|||
| Into | Ipharamitha | ||
| Ubude (Ngaphandle Kwesikhumba) | 1825 mm | ||
| Isisindo | 589 Kg | ||
| Ububanzi Bokuxhasa | 275 mm | ||
| Ukugxilwa Kwesithunzi | API 6 5/8" REG | ||
| Isikhathi Sesibhakabhaka | SD12 | ||
| Isiphakathi sesikhala | 295–400 mm | ||
| Umphawu Wokusebenza | 1.5–3.3 MPa | ||
| Isikhathi Sokubhala Okumelwe | 25–50 r/min | ||
| Ukusebenzisa amafutha (1.8 MPa) | 50 m³/min | ||
| Ukusetshenziswa kwe-Air (2.4 MPa) | 70 m³/min |
1. Ukudlula amanzi
IsiGaba se-SD sisebenzisa kakhulu emizini, emazweni okukhula amanzi, namaphakathi amancane ekukhuleni amanzi. Sinezindlela zokufika ezinkimbinkimbi ngokuphelele kwezindawo eziphansi nezindawo eziphakade, futhi sithembekile kubhekene nesikhundla esiphansi kanye nesikhundla esedlule.
2. Amaprojekthi amancane kuya kuhambele eminingini
Ayisisekelwa kubhulasti hholi ukudrili ngamaprojekthi amancane eminingini. I-SD hammer iyabeka impact energy efanayo, ekuvumelana nokuthi isilwane siphakanyiswe ngokuphelele nokuthi ukudrili kwenziwa ngokuphelele.
3. Izisekelo zokuvula
Isetshenziselwa emaphakathi esilime, egandini, nesinye izinhlanganisi zokudrili. Iyabika umsebenzi wokuphelele kubhulasti hholi okugcwele ngemitha yezindawo ezincane ngokuphula imali yokusebenza.
4. Ukusika kwesifundazwe sokubuyisa indawo
Isetshenziselwa kubasebenta, ukuvimbela izihlangu, nokudrili izihole zokuvimbela. Isithunzi esincane siyavumela ukusebenza kuzindawo eziphakeme noma ezingahlanzela ngokuphelele.
5. Ukuchaza kwesayensi yezembo
Iyisisekelwa kubhulasti yokuchaza kwesayensi yezembo nokukhipha izihloko okufune ukuthi kubhulastwe ngokuphelele nokuthi izihole ziyakhiwa ngokuphelele.
Ukuphakanyisa kwamandla okukhanya okuphelele ukufika kwezinye izikhathi
Isisitshalo sesithunzi sokuhambisa amafutha esihlukile sokugcina amafutha okuncane
Ibhalansi yamaphawu e-steel yokuhlakisa isikhathi eside sokusebenza
Ukusebenza kwezinkundla zokuphakama kwezinkundla eziningi kanye nezinkundla ezimnyama
Ukuchaza kwezinye izinto kanye nokubhekisa ukuthi isithunzi sikhula ngokushesha
Siyakhiqiza nezinhlangano zesithunzi se-DTH zokuzoba
Siyakhiqiza kwezinhlangano zokuzoba eziningi kwezinkundla
Umbuzo 1: Iziprojekthi zokuzoba ziziphi eziphathelene nesithunzi se-SP?
Siyakhiqiza kwezinhlangano zokuzoba amanzi, ukuvikela kweminingi, ukuzoba kwezinduna, ukubeka amasiko, nokuzoba kwezinkundla zokuphakama.
Umbuzo 2: Izinkulungwane zezinkulungwane zokuzoba ziziphi?
Izinkulungwane zezinkulungwane zokuzoba eziphathelene ziyakhethwa kusuka ku-115mm ukuze kube ku-165mm, nokuthi i-138mm, i-146mm, kanye ne-152mm ziyizinkulungwane ezinconywa kakhulu.
Umbuzo 3: Kufanele usebenze nombuzo wokuphuma kwamanzi waphansi?
Kusukwela umbuzo wokuphuma kwamanzi waphansi wokusebenza kahle ngokuphelele, owenziwa ngokugcina phansi kwe-1.7–3.5 MPa.
Umbuzo 4: Ungathint’ isithunzi sengathi?
I-Serie ye-SP ingathint’ isithunzi sengathi esisodwa kubili-100–400 imitha, kusukela kwezimo zemifula nezinkotho zezinkotho.
Umbuzo 5: Ingasebenzisa ngokuthi yiliphi na i-rig yamadluli?
Yebo, iyakhiwa ukuba ibe yiliphi na i-DTH drilling systems futhi ingasebenzisa ngokushesha kwi-rigs eziningi zezinkotho.
Isikopiya © Quzhou Mazellion Heavy Industry Technology Co., Ltd. Konke imikhawulo yasemthethweni — Inqubomgomo Yokuvikela
EN
