Ke SD Series DTH Hammer e Nang le Phetoho e Kgolo ya Lefatše e etselitsoe ho cheka ka sekoting ka matla a phahameng ka har'a lesoba le tebileng le le mahareng. E etselitsoe maemo a thata a ho cheka, e sebelisoa haholo ho cheka liliba tsa metsi, ho batla meepo, ho phatloha ha majoe, ho cheka ha geothermal le merero ea boenjiniere ea motheo moo ho hlokahalang katleho e phahameng ea ho kenella le ts'ebetso e tšepahalang.
E entsoe ka tšepe e entsoeng ka tšepe e entsoeng ka tšepe e nang le likarolo tse phahameng tse nang le likarolo tse sebetsang hantle, SD Series e fana ka matla a matla le a tsitsitseng a ho otla ha e ntse e boloka ho hanyetsa ho roala hantle maemong a moea a phahameng. Tsamaiso e ntlafalitsoeng ea ho aba moea e fokotsa tšenyo ea matla, e ntlafatsa lebelo la ho cheka le ho fokotsa tšebeliso ea moea, e thusa borakonteraka ho finyella tlhahiso e phahameng le litšenyehelo tse tlaase tsa ho sebetsa.
Letoto la li-SD le akarelletsa mefuta e mengata e fapaneng ho tloha ho SD4 ho ea ho SD12 , ho koahela li-diameter tsa lesoba ho tloha 110 mm ho isa ho 400 mm . Boholo bo fapaneng ba hamore bo fumaneha ho bapisa li-rig tse fapaneng tsa ho cheka, melamu ea ho cheka le li-bits, e leng se etsang hore letoto lena le tšoanelehe bakeng sa ho cheka liliba tsa metsi tse tloaelehileng le lits'ebetso tsa ho cheka motheo o moholo. Li-hammer li lumellana le li-connection tse tloaelehileng tsa API thread le mekhoa e sebelisoang haholo ea ho cheka DTH.
Ka khatello ea ho sebetsa ho tloha ho 1,0 MPa ho isa ho 3,3 MPa , SD Series e fana ka ts'ebetso e tsitsitseng ea ho cheka ka har'a majoe a bonolo, a mahareng le a thata. Sebopeho sa eona se tiileng, ho bonolo ho se hlokomela le likarolo tsa sona tse ka nkeloang sebaka ke tsona tse etsang hore se sebetse nako e telele le ho fokotsa nako eo se sa sebetseng ka eona tšimong.
Ebang ke bakeng sa liliba tsa phepelo ea metsi, ho cheka masoba a ho phatloha, merero ea matla a mocheso oa lefatše, kapa kaho ea meralo ea motheo, SD Series e fana ka ts'ebetso e ts'epahalang ea ho cheka, ts'ebetso e tsitsitseng le ts'ebetso e theko e tlaase bakeng sa borakonteraka ba litsebi ba
Ho qala ho sebedisa: o tumele mohato → o fumana phatlalatso ya teknoloji e fapaneng le ho bontša tharollo → o amohela toropo → ho etsa le ho tšekwa → ho romela ha kotsi → mohato o tloha ho sebelisa likarolo tse ngata le tšebetso ya teknoloji. Re araba haufi le re thusa ka mohato ohle wa toropo.
Ha u sule o tseba serisi sefe sa DTH hammer se fita ho ts'ebetso ea hao? Ratisa re rona diametere e hlokahalang ya pholo le bophahle, masenine a rona a tla lona serisi sa hammer le modeli e tšoanang hantle le rig le formation ea hao.
Lipart ya SD4 |
|||
| Moahloli. | Mafuta | Fetola | Nomoro ya Mafuta |
| 1 | Mafuta a Maholo | 8.8 Kg | 01-SD4-01 |
| 2 | "O" Ring | 0.01 Kg | 01-SD4-02 |
| 3 | Vali ya boloka | 0.46 kg | 01-SD4-03 |
| 4 | Letšatši la Phalane | 0.04 Kg | 01-SD4-04 |
| 5 | Mokhukhu wa rubber | 0.2 Kg | 01-SD4-05 |
| 6 | Sedima sa Mokhetho | 2.1 Kg | 01-SD4-06 |
| 7 | Silindara ea Bophelong | 2.45 Kg | 01-SD4-07 |
| 8 | Piston | 9 Kg | 01-SD4-08 |
| 9 | Mokhetho oa Piston | 15.6 Kg | 01-SD4-09 |
| 10 | Ring ya Kgoniho | 0.2 Kg | 01-SD4-10 |
| 11 | "O" Ring | 0.01 Kg | 01-SD4-11 |
| 12 | Drive Chuck | 4 Kg | 01-SD4-12 |
| 13 | Bit ya Ho Tšepisa | — | 01-SD4-13 |
Mabapi a Bokone |
|||
| Dilo | Parametere | ||
| Boleleli (Ha ho Bit) | 1082 mm | ||
| Fetola | 43 Kg | ||
| Boholo ba ntlha | 99 mm | ||
| Mokhutlo wa ho hokahanya | API 2 3/8" REG | ||
| Sekhutlo sa lebiti | SD4 | ||
| Mofuta wa lihole | 110–135 mm | ||
| Phetshe ya mosebetsi | 1.0–2.2 MPa | ||
| Lebelo le khothalletsoang la ho potoloha | 30–60 r/min | ||
| Khothliso ya Lefu (1.8 MPa) | 5.5 m³/min | ||
| Khothliso ya Lefu (2.4 MPa) | 10 m³/min |
Liste ya Mafuta a SD5 |
|||
| Moahloli. | Mafuta | Fetola | Nomoro ya Mafuta |
| 1 | Mafuta a Maholo | 14.7 Kg | 01-SD5-01 |
| 2 | "O" Ring | 0.02 Kg | 01-SD5-02 |
| 3 | Vali ya boloka | 1 Kg | 01-SD5-03 |
| 4 | Letšatši la Phalane | 0.06 Kg | 01-SD5-04 |
| 5 | Mokhukhu wa rubber | 0.2 Kg | 01-SD5-05 |
| 6 | Sedima sa Mokhetho | 4.1 Kg | 01-SD5-06 |
| 7 | Silindara ea Bophelong | 4.4 Kg | 01-SD5-07 |
| 8 | Piston | 17.3 Kg | 01-SD5-08 |
| 9 | Mokhetho oa Piston | 23.5 Kg | 01-SD5-09 |
| 10 | Ring ya Kgoniho | 0.5 Kg | 01-SD5-10 |
| 11 | "O" Ring | 0.01 Kg | 01-SD5-11 |
| 12 | Drive Chuck | 7.8 Kg | 01-SD5-12 |
| 13 | Bit ya Ho Tšepisa | — | 01-SD5-13 |
Mabapi a Bokone |
|||
| Dilo | Parametere | ||
| Boleleli (Ha ho Bit) | 1178 mm | ||
| Fetola | 73.6 Kg | ||
| Boholo ba ntlha | 125 mm | ||
| Mokhutlo wa ho hokahanya | API 2 3/8" REG | ||
| Sekhutlo sa lebiti | SD5 | ||
| Mofuta wa lihole | 135–155 mm | ||
| Phetshe ya mosebetsi | 1.0–2.5 MPa | ||
| Lebelo le khothalletsoang la ho potoloha | 30–60 r/min | ||
| Khothliso ya Lefu (1.8 MPa) | 9 m³/min | ||
| Khothliso ya Lefu (2.4 MPa) | 15 m³/min |
Lipalesa ya Mafuta a SD6 |
|||
| Moahloli. | Mafuta | Fetola | Nomoro ya Mafuta |
| 1 | Mafuta a Maholo | 20.3 Kg | 01-SD6-01 |
| 2 | "O" Ring | 0.02 Kg | 01-SD6-02 |
| 3 | Vali ya boloka | 0.8 kg | 01-SD6-03 |
| 4 | Letšatši la Phalane | 0.05 Kg | 01-SD6-04 |
| 5 | Mokhukhu wa rubber | 0.3 kg | 01-SD6-05 |
| 6 | Sedima sa Mokhetho | 5 Kg | 01-SD6-06 |
| 7 | Silindara ea Bophelong | 4 Kg | 01-SD6-07 |
| 8 | Piston | 23.5 Kg | 01-SD6-08 |
| 9 | Mokhetho oa Piston | 34.5 kg | 01-SD6-09 |
| 10 | Ring ya Kgoniho | 0.5 Kg | 01-SD6-10 |
| 11 | "O" Ring | 0.01 Kg | 01-SD6-11 |
| 12 | Sleeve ea Tlhomamisang | 1.6 kg | 01-SD6-12 |
| 13 | Drive Chuck | 8 kg | 01-SD6-13 |
| 14 | Bit ya Ho Tšepisa | — | 01-SD6-14 |
Mabapi a Bokone |
|||
| Dilo | Parametere | ||
| Boleleli (Ha ho Bit) | 1277 mm | ||
| Fetola | 99 kg | ||
| Boholo ba ntlha | φ142 mm | ||
| Mokhutlo wa ho hokahanya | API 3 1/2" REG | ||
| Sekhutlo sa lebiti | SD6 | ||
| Mofuta wa lihole | 150–190 mm | ||
| Phetshe ya mosebetsi | 1.0–2.5 MPa | ||
| Lebelo le khothalletsoang la ho potoloha | 30–60 r/min | ||
| Khothliso ya Lefu (1.8 MPa) | 20 m³/mino | ||
| Khothliso ya Lefu (2.4 MPa) | 28 m³/min |
Lipontsho tsa Mafuta a SD8 |
|||
| Moahloli. | Mafuta | Fetola | Nomoro ya Mafuta |
| 1 | Mafuta a Maholo | 42 Kg | 01-SD8-01 |
| 2 | Shim ya ho Tloha | 0.2 Kg | 01-SD8-02 |
| 3 | "O" Ring | 0.02 Kg | 01-SD8-03 |
| 4 | Vali ya boloka | 1.3 Kg | 01-SD8-04 |
| 5 | Letšatši la Phalane | 0.09 kg | 01-SD8-05 |
| 6 | Mokhukhu wa rubber | 0.4 Kg | 01-SD8-06 |
| 7 | Sedima sa Mokhetho | 12.7 Kg | 01-SD8-07 |
| 8 | Silindara ea Bophelong | 9.1 Kg | 01-SD8-08 |
| 9 | Piston | 43.5 Kg | 01-SD8-09 |
| 10 | Mokhetho oa Piston | 64.5 Kg | 01-SD8-10 |
| 11 | Ring ya Kgoniho | 1.25 Kg | 01-SD8-11 |
| 12 | "O" Ring | 0.02 Kg | 01-SD8-12 |
| 13 | Sleeve ea Tlhomamisang | 3.35 Kg | 01-SD8-13 |
| 14 | Drive Chuck | 16 Kg | 01-SD8-14 |
| 15 | Bit ya Ho Tšepisa | — | 01-SD8-15 |
Mabapi a Bokone |
|||
| Dilo | Parametere | ||
| Boleleli (Ha ho Bit) | 1463 mm | ||
| Fetola | 194 Kg | ||
| Boholo ba ntlha | 180 mm | ||
| Mokhutlo wa ho hokahanya | API 4 1/2" REG | ||
| Sekhutlo sa lebiti | SD8 | ||
| Mofuta wa lihole | 195–254 mm | ||
| Phetshe ya mosebetsi | 1.5–3.3 MPa | ||
| Lebelo le khothalletsoang la ho potoloha | 30–60 r/min | ||
| Khothliso ya Lefu (1.8 MPa) | 26 m³/min | ||
| Khothliso ya Lefu (2.4 MPa) | 34 m³/min |
Lijst ya Mafuta a SD10 |
|||
| Moahloli. | Mafuta | Fetola | Nomoro ya Mafuta |
| 1 | Mafuta a Maholo | 60 Kg | 01-SD10-01 |
| 2 | "O" Ring | 0.03 Kg | 01-SD10-02 |
| 3 | Vali ya boloka | 1.5 kg | 01-SD10-03 |
| 4 | Letšatši la Phalane | 0.2 Kg | 01-SD10-04 |
| 5 | Sedima sa Mokhetho | 12.8 Kg | 01-SD10-05 |
| 6 | Silindara ea Bophelong | 13.5 kg | 01-SD10-06 |
| 7 | Piston | 71 kg | 01-SD10-07 |
| 8 | Mokhetho oa Piston | 85 kg | 01-SD10-08 |
| 9 | Ring ya Kgoniho | 2.76 kg | 01-SD10-09 |
| 10 | "O" Ring | 0.02 Kg | 01-SD10-10 |
| 11 | Sleeve ea Tlhomamisang | 5 Kg | 01-SD10-11 |
| 12 | Drive Chuck | 21 Kg | 01-SD10-12 |
| 13 | Bit ya Ho Tšepisa | — | 01-SD10-13 |
Mabapi a Bokone |
|||
| Dilo | Parametere | ||
| Boleleli (Ha ho Bit) | 1413 mm | ||
| Fetola | 273 Kg | ||
| Boholo ba ntlha | 225 mm | ||
| Mokhutlo wa ho hokahanya | API 5 1/2" REG | ||
| Sekhutlo sa lebiti | SD10 | ||
| Mofuta wa lihole | 254–311 mm | ||
| Phetshe ya mosebetsi | 1.5–3.3 MPa | ||
| Lebelo le khothalletsoang la ho potoloha | 25–50 r/min | ||
| Khothliso ya Lefu (1.8 MPa) | 40 m³/min | ||
| Khothliso ya Lefu (2.4 MPa) | 60 m³/min |
Lethathamento la Mafuta a SD12 |
|||
| Moahloli. | Mafuta | Fetola | Nomoro ya Mafuta |
| 1 | Mafuta a Maholo | 134 Kg | 01-SD12-01 |
| 2 | Shim ya ho Tloha | 0.8 kg | 01-SD12-02 |
| 3 | "O" Ring | 0.04 Kg | 01-SD12-03 |
| 4 | Vali ya boloka | 1.5 kg | 01-SD12-04 |
| 5 | Letšatši la Phalane | 0.2 Kg | 01-SD12-05 |
| 6 | Sedima sa Mokhetho | 21 Kg | 01-SD12-06 |
| 7 | Silindara ea Bophelong | 29 Kg | 01-SD12-07 |
| 8 | Piston | 118 kg | 01-SD12-08 |
| 9 | Mokhetho oa Piston | 220 kg | 01-SD12-09 |
| 10 | Ring ya Kgoniho | 5.2 kg | 01-SD12-10 |
| 11 | "O" Ring | 0.03 Kg | 01-SD12-11 |
| 12 | Sleeve ea Tlhomamisang | 5.2 kg | 01-SD12-12 |
| 13 | Shim ya ho Tloha | 0.8 kg | 01-SD12-13 |
| 14 | Drive Chuck | 53.5 Kg | 01-SD12-14 |
| 15 | Bit ya Ho Tšepisa | — | 01-SD12-15 |
Mabapi a Bokone |
|||
| Dilo | Parametere | ||
| Boleleli (Ha ho Bit) | 1825 mm | ||
| Fetola | 589 Kg | ||
| Boholo ba ntlha | 275 mm | ||
| Mokhutlo wa ho hokahanya | API 6 5/8" REG | ||
| Sekhutlo sa lebiti | SD12 | ||
| Mofuta wa lihole | 295–400 mm | ||
| Phetshe ya mosebetsi | 1.5–3.3 MPa | ||
| Lebelo le khothalletsoang la ho potoloha | 25–50 r/min | ||
| Khothliso ya Lefu (1.8 MPa) | 50 m³/min | ||
| Khothliso ya Lefu (2.4 MPa) | 70 m³/min |
1. Ho qhobela ho tshebetso ea metsi
Serese ya SD e sebelisoa khutlunyane ho tsebiso ya mafura a lefelo, ho tsebiso ya mafura a mahala, le ho tsebiso ya mafura a masepala a nyenyane. E fana ka mosebetsi o tsitsitseng oa ho fihla ho lekholo la mafura ho tsebiso ya mafura a mafutha le ho tsebiso ya mafura a makhoro, e bitsoang e le e nepahetseng ho tsebiso ya mafura a lekholo le a lekholo-nyenyane.
2. Tsebiso e nyenyane le e lekholo ya ho fihla ho lekholo la mafura
E sebelisoe ho tsebiso ya mafura a ho fihla ho lekholo la mafura ho tsebiso e nyenyane ya ho fihla ho lekholo la mafura. Ho fihla ho lekholo la mafura ya SD e fana ka mosebetsi o tsitsitseng wa ho fihla ho lekholo la mafura, e bontshang ho fihla ho lekholo la mafura o tsitsitseng le mosebetsi o tsitsitseng wa ho tsebisa.
3. Ho qhobela ho lithaba tsa ho qhobela
E sebelisoe ho tsebiso ya mafura a lekholo la mafura a limestone, granite, le tse ling tsa tsebiso ya mafura. E fana ka mosebetsi o nepahetseng ho tsebiso ya mafura a lekholo la mafura a ho fihla ho lekholo la mafura le ho lula ho sebelisa mali a nyenyane.
4. Ho etsa mafura a ho qetela ho tsebiso ya mafura
E sebelisoe ho tsebiso ya mafura a ho qetela ho tsebiso ya mafura, ho tsebiso ya mafura a ho qetela ho tsebiso ya mafura, le ho tsebiso ya mafura a ho qetela ho tsebiso ya mafura. Sebopeho sa se ntši se fana ka mosebetsi o sebeliswang ho tsebiso ya mafura a lekholo le a lekholo-nyenyane.
5. Ho tsebisa ho lekholo la mafura
E lekholo ho tsebiso ya mafura a ho tsebisa ho lekholo la mafura le ho tsebisa ho lekholo la mafura tseo e hlokang mosebetsi o tsitsitseng wa ho fihla ho lekholo la mafura le ho tsebisa ho lekholo la mafura o nepahetseng.
Mafura a phahameng a sebetsang ho fihla ho lekholo ka nako e nyenyane
Sistimi ya ho arola mafura e hlophisitsoeng ho fokotsa ho sebelisoa ha mafura
Mokhanyetse o etilweng ka leholo o sebelisang likhoto tsa leholo ho bontša boima ba ho sebelisoa bo telele
Mosebetsi o sa feleng ho li-formation tsa litho tsa leholo ho isa ho tsa leholo
Ho sebelisoa ha bonolo le motheo o bonolo wa ho etsa
O amanang le sistimi tsa ho qhibisa tsa DTH tsa tsohle
O sebetsang ho li-operasi tsa ho qhibisa li-borehole tsa leholo
P1: Ke sebetsa ho feta efe ea ho qhibelana?
E sebetsa ho qhibelana ha mafura, ho batla khoale ya ho fihlela, ho qhibelana ha leqhubu la ho qhibelana, ho qhibelana ha sebaka sa ho bala, le ho qhibelana ha mafura a ho tsoa ho leqhubu.
P2: Li-size tsa ho qhibelana tseo li rekisang?
Li-size tsa DTH tseo li rekisang li lekana le 115mm ho isa ho 165mm, le 138mm, 146mm, le 152mm li sebetsang haholo ho tse ling tse phoofolo.
P3: Ke compressor ea phepelo efe e hlokahalang?
Ho rekisa compressor ea phepelo ea ho lekana le ho lekana ea ho lekana ea ho lekana ea 1.7–3.5 MPa ho sebetsa ka mokhoa o nepahetseng.
P4: E ka qhibelana hantle e kae?
Serese sa SP e ka fihla ho qhibelana ha 100–400 metere, ho iponahatsa ho tsamaiso ya litho le ho sebetsa ha litšebiso.
P5: Na e ka sebelisoa le litšebiso tse teng tsa ho qhibelana?
Ee, e sebetsana le litšebiso tsa ho qhibelana tsa DTH tse tloaelehileng, le e ka amohela ka mokhoa o monyane ho litšebiso tsohle tsa ho qhibelana tse tloaelehileng.
Hlalosetso © Quzhou Mazellion Heavy Industry Technology Co., Ltd. Tsohle tsa Lichaba li Sebetsa — Lefelo la bopeli
EN
